3D FPV camera The BlackBird 1

BlackBird 1 is very small and very easy course 3D FPV camera, with very big functionality which shall change your understanding of FPV.

View the embedded image gallery online at:
http://fpv3dcam.com/the-blackbird.html#sigFreeIded2a00d461

Weight

Small weight. Only 23 grams, will positively affect flight time as not enough electric power is spent!

Interlaced 3D

The camera "BlackBird" creates analog video NTSC a signal in a format of interlaced 3D (field sequential 3D) that allows to transfer him by means of one standard video of the transmitter.

Effect of presence

Using 3D FPV the camera "BlackBird", you will feel the speed, volume, distance - you will look at the world two eyes as it was conceived initially by the nature.

Easy connection

It isn't necessary to look for additional devices, simply connect a video camera to the transmitter of video signal and the power supply 7V - 12V.

Power

The broad range of power voltage - from 7V to 12V, will allow you to connect the camera directly to the onboard battery!

Size

Very modest overall dimensions, its size doesn't exceed the size of the normal FPV camera! You can set without problems the camera on a radio-controlled quadrocopter, the airplane or the car.

Featured model 3D video glasses

Prober EVG 920V

HeadPlay

Fat Shark Attitude V3

Characteristics

Video

Type of sensors: OmniVision OV7950
Size and matrix type: 1/4'' CMOS
Array size: 656 x 492
Sensitivity: 3.0V/Lux-sec @ 5600K
Ratio signal/noise : 48 dB

Mechanical characteristics

The weight of the camera: 21 g.
The weight of the camera with cable: 23 g.
Overall dimensions L,W,H: Ver 1.3.2 - 34 mm, 32 mm, 25 mm, Ver 1.3.3 - 34 mm, 34 mm, 25 mm
Interface connector: On the board MW-3M, on the cable MU-3F
Operating temperature: From -20 till +70 ºC

Optics